This comprehensive review delves into the Dermaglow 2 Microdermabrasion Machine, providing a detailed look at its setup, operation, maintenance, and overall performance. We explore the ease of use, highlighting key features that contribute to a streamlined and efficient microdermabrasion treatment experience. From initial setup and filter installation to troubleshooting common issues like low crystal flow, this review covers all aspects to help potential buyers make an informed decision. We also address the importance of using genuine Dermaglow supplies for optimal results and discuss the benefits of the company's responsive customer support.This review aims to equip readers with the knowledge necessary to confidently assess the Dermaglow 2's suitability for their needs. We examine the machine's user-friendly design, focusing on practical aspects like vacuum pressure adjustment, filter replacement, and preventative maintenance. Our assessment covers both the advantages and potential challenges, offering a balanced perspective on the Dermaglow 2's performance and value as a professional microdermabrasion tool. Ultimately, we aim to provide a clear and concise evaluation to assist professionals in their decision-making process.
Pros And Cons
- Easy to move due to roller base.
- Uses a filter bag instead of a debris canister, simplifying maintenance.
- Quiet operation.
- Easy to set up and use.
- Excellent technical support.
- Filter bags must be purchased from Aesthetic Solutions.
- Vacuum bag needs to be checked and potentially replaced regularly.
- Possible clogging of crystals in the tubing may require unclogging.
Read more: 5 Best Microdermabrasion Machines for Exfoliation
Setup and Installation
Setting up the Dermaglow 2 is surprisingly straightforward. Begin by removing the protective caps from the cartridge and attaching the handpiece tubing. The larger tube goes into the center port, and the smaller tube into the smaller port. Ensure the cartridge is pushed completely onto the vacuum post – avoid twisting to prevent damage to the O-rings.
Next, connect the power cord to the back of the machine and plug it into a dedicated outlet. Avoid using the same outlet for other equipment like wax machines or steamers. The power switch is conveniently located on the side of the unit.
Finally, install the filter bag. This is a significant improvement over older models which required emptying a debris canister after every treatment. The filter bag simply fits into the opening on the back of the machine and secures with screws.
Filter Replacement and Maintenance
Periodic filter replacement or cleaning may be necessary. Technical support can guide you on the frequency of this maintenance. To clean or replace the filter, unscrew the clear plastic filter canister counterclockwise. Remove the white filter, carefully wipe or tap out any micro-crystals. Replace the filter and tighten the canister, ensuring the O-ring is properly seated.
When disposing of used filters, always wear latex or synthetic gloves and a barrier mask. This precaution is essential to protect yourself from any residual micro-crystals.
Operation and Vacuum Pressure Adjustment
After installing the cartridge and turning on the power, adjust the vacuum pressure using the dial on the machine. Turning the dial clockwise increases the vacuum level. It's recommended to test the machine on your forearm before treating a client to determine a comfortable level.
Always start treatments conservatively and observe your client's response. Monitor the treatment's effect visually and by touch. Remember to store the handpiece upright on the machine after each treatment.
Troubleshooting
Regularly test the vacuum intensity. Turn the intensity knob all the way up and kink the tubing. The meter should read between 26.4 and 26.7. If it doesn't, check the vacuum bag seal.
If you have low or no crystal flow, check the crystal flow first. If it remains an issue, use the bulb provided in the starter kit to clear any clogs in the tubing by injecting air into the crystal reservoir. Remember to remove the black tubing to avoid wasting crystals.
Conclusion
The Dermaglow 2 Microdermabrasion machine is a user-friendly device with a simple setup and intuitive controls. Features like the disposable filter bag and easily accessible design streamline the process, reducing downtime and maintenance. The machine's quiet operation and effective vacuum and crystal flow make it a worthwhile investment for any spa or salon professional.
However, remember to always purchase genuine Dermaglow crystals and filter bags for optimal performance. The company's excellent customer support ensures quick resolution for any unforeseen issues. Overall, the Dermaglow 2 delivers a high-quality microdermabrasion experience with minimal hassle.